| 1990 |
Electrical control upgrade of Aerobridge gate Gate 7 Melbourne International |
| 1992-1993 |
General Aerobridge Maintenance |
| 1994 |
Installation of aerobridges D1 and D2 at Melbourne International |
| 1994 |
Install auto-levellers and modify aerobridge control circuits on 4 off aerobridges at Sydney International airport. |
| 1995-1996 |
Total design, installation and commissioning of electrical control system for aerobridges D9 and D11 apron drive aerobridges and elevating links at Melbourne International Airport. |
| 1995-1996 |
Full electrical upgrade of aerobridge electrical controls for Qantas aerobridges 1,2,4,6,8, and 10 at Melbourne Domestic Terminal. |
| 1995-1996 |
Electrical upgrade to aerobridges D3, D4 and D8 at Melbourne International Airport. |
| 1996 |
Formal agreement with Barcelona (Spain) aerobridge manufacturer, TEAM |
| 1997 |
Dismantle aerobridge 9 and relocate to gate 12 for Qantas at the Melbourne Domestic Terminal. |
| 1991-1997 |
General Aerobridge Maintenance |
| 1998 |
RATE dismantled and relocated 5 aerobridges at Sydney International Airport prior to terminal development for the 2000 Olympic Games. |
| 1999-2001 |
Maintenance contract with Ansett Australia to maintain their 10 aerobridges in Melbourne. |
| 2001-2004 |
Various upgrades to all Melbourne International aerobridges. Training to Virgin Blue ground staff in the operation of each type of aerobridge on the Southern Finger at Melbourne Airport |
| 2003 |
Supply 5 aerobridge hoods to Perth International Airport. |
| 2004-2005 |
Installation of 14 TEAM Glass Aerobridges at the New Adelaide Airport Terminal. |
| 2004-2005 |
Control upgrade on aerobridges D1, D2, D5, D6, E1, E3, E5, E6, E7 and E8 at Melbourne airport.
Reinstalled an existing aerobridge to the F12 gate at Melbourne Airport. This also included the manufacture of a small link from the aerobridge to the building.
|
| 2006 |
Upgrade electrical control and hydraulic control systems on aerobridges D3, D4 and D8 at Melbourne International Airport.
Installation and commissioning of a TEAM built gangway at the Portside Wharf development for Multiplex Constructions in Brisbane. |
| 2006-2007 |
Relocate a noseloader aerobridge at bay Delta 2 Melbourne International Airport. |
| 2007 |
Install new apron drive aerobridge at Darwin International Airport. |
| 2007 |
Supply door shoe sensors to Virgin Blue base in Brisbane. |
| 2007-2008 |
Upgrade three aerobridge controls and hydraulic systems at Melbourne Airport. |
| 2007-2008 |
Upgrade elevating link controls at Melbourne Airport. |
| 2007-2008 |
Full mechanical and electrical control system upgrade of 3 x Jetway “T” head aerobridges at Darwin International Airport. This included removal of the entire aerobridge from site for blasting painting and repairs. Electrical installation was then done prior to delivery back to the airport, for re-installation and commissioning. |
| 2008 |
Supply and installation of two new apron drive aerobridges complete with 400Hz GPU’s and cable reelers to Perth Airport Domestic Bays 16 and 17. |
| 2008 |
Remove, to storage, aerobridge D10 at Melbourne International Airport. Re-install aerobridge D10 after new fix link was installed by others. |
| 2008-2009 |
Supply and install 4 new apron drive arobridges to the new terminal at Melbourne International Airport. Two of these bridges will serve the upper deck of the Airbus A380 aircraft. |
| 2009 |
Service Level Agreement reached with Melbourne Airport for ongoing maintenance on aerobridges and elevated links. |
| 2009-2010 |
Removal of existing Delta 8 aerobridge and fixed link, supply of new fixed link and apron drive aerobridge. |
